Please Carefully Check All Pictures and Part Numbers in the Listing to Make Sure It's the Correct Product you Need

Part Number: 
Pressure Washer Chemical Soap Injector Kit Compatible with Pumps 190593GS 190635GS 203640GS 308452002

Application: 
Compatible Below Pressure Washer 020206-0, 020211-0, 020212-0, 020214-0, 020215-0, 020216-0, 020218-0, 020239-0, 020219-0, 020220-0, 020222-0, 020222-1, 020223-0, 020224-0, 020224-1, 020226-0, 020244-0, 020227-0, 020244-1, 020228-0, 020228-1, 020229-0, 020230-0

Compatible with Troy-Bilt Pressure Washer 020200-0, 020207-0, 020207-1, 020208-0, 020208-1, 020213-0, 020240-0, 020240-2, 020241-0, 020242-0, 020242-2, 020242-4, 020245-0, 020245-1, 020245-2, 020292-3, 020293-0, 020293-1, 020294-0, 020295-0, 020296-0, 020316-2, 020337-0, 020316-0, 020316-1, 020381, 01903

Compatible with Homelite
Compatible with Ryobi
Compatible with Husky
Compatible with Excell DeVilbiss
Compatible with Troy Bilt
Compatible with Campbell Hausfeld
Compatible with Generac
Compatible with Coleman Powermate
Compatible with Ridgid
Compatible with Task Force
Compatible with Faip
Compatible with Brute
Compatible with Duracraft
Compatible with Simoniz
Compatible with Simpson
Compatible with John Deere

Specification:
1/8’’ -27 Male BSP thread

Package Included: 
190593GS Chemical Injector Kit including 2 x Brass Barbs + 2 x Check Valve Balls + 2 x Springs + 4 x O-Rings

It Is a Replacement Part, Not Original Part. But It Can Work Good For You
How To Replace: Follow Soap Hose To End And You'll Find Injector. Take Off Soap Hose
 Use Wrench To Remove Old Injector. Clean Out Any Gunk Or Dried Soap In Receptacle
 Make Sure Rubber O Ring Is On Injector. Put Ball Bearing Inside Injector And Then The Spring With Small End Of Spring Against The Ball Bearing
 Insert Injector Into Receptacle And Tighten Injector With 13mm Wrench. Don't Overtighten, You'll Break The O Ring Or Crack White Metal On Pump
 Put the soap hose back on